Honda Civic Service Manual page 1108

Steering Gearbox
Disassembly (cont'd)
8. Remove cylinder lines A and B from the gearbox.
CYLINDER LINE g
CYLINOCR LINE A
Drain the fluid from the cylinder fittings by slowly
moving the steering rack back and forth,
Remove the two flange bolts, then remove the valve
body unit from the gearbox. (See page 17-52 for
valve body unit disassembly.)
VALVE BOOY UNIT
FLANGE BOLT
1 0 .
'96 - '97
mod.ls:
32 mm SHIMS
98 - '00 modok:
WAVE WASHER
17-50
13. Loosen and remove the cvlinder end.
11. Drill a 3 mm (0.12 in) diameter hole approximatety
2.5 - 3.0 mm (0.10 - 0.12 in) in depth in the staked
point on the cylinder.
cAunoN:
o Do nol allow metal shavings to onter the cylin.
der housing.
. After romoying iha cylinder end, remova any
bur6 at the staksd point.
Dcpthi 2,5 - 3.0 mm {0.10 - 0.12 in}
CYUNDER
1 2 . H o l d t h e s t e e r i n g
snown.
g e a r b o x u s i n g a C - c l a m p a s