Honda Civic Service Manual page 1023

Transmission
Reassembly (cont'dl
65 lnstall the solenoid harness connector with a new O-ring (one bolt), then install the lower valve body assembly with
three dowel pins (eight bolts).
66. Install the ATF strainer with a new O-ring (two bolts).
67. lf necessary, assemble the ATF pan, ATF filter, and the ATF cooler inlet line (see page 14_303).
68. Install the ATF pan with the two dowel pinsand a new ATF pan gasket (fourteen bolts).
69. Install the ATF cooler inlet line bracket bolt.
70. Installthe ATF cooler outlet line with the line bolt and new sealing washers.
6 x 1 . 0 m m
12 N.m 11.2 kgf.m,
8.7 rbtft)
DOWEL PINS
ATF STRAINER
DOWEL PINS
ATF PAN,/ATF FILTER/
ATF COOLER INLET
LINE ASSEMELY
@
@
C4
CONNECTOE
6 x 1 . 0 m m
12 N.m {1.2 kgf.m,
8.7 tbtftl
6 x 1 . 0 m m
1 2 N m 1 1 . 2 k g l . m ,
8.? tbf.ft)
LOWER VALVE BODY
ASSEMBLY
6 x 1 . 0 m m
12 N.m 11.2 kgf.m,
8.7 tbt.ft)
ATF COOI.ER INI.IT
LINE BRACKET BOLT
I x 1.25 mm
26 N.m (2.7 kgt.m, 20 lbf.ft)
ATF COOLER OUTI.IT LINE
14-346