Honda Civic Service Manual page 817

Valve Caps
Description
C a p s w i t h o n e p r o j e c t e d t i p a n d o n e f l a t e n d a r e
installed with the flat end toward the inside of the
valve body.
Caps with a projected tip on each end are installed
w i t h t h e s m a l l e r t i p t o w a r d t h e i n s i d e o f t h e v a l v e
body. The small tip is a spring guide.
Toward outside of valvo body.
Toward insido ot valvo body.
C a p s w i t h o n e p r o j e c t e d t i p a n d h o l l o w e n d a r e
installed with the tip toward the inside of the valve
body. The tip is a spring guide.
Towa.d outside o, valv6 bodv.
14-138
Toward insid€ of valv6 bodv.
Caps with hollow ends are installed with the hollow
end away from the inside ofthe valve body.
Caps with notched ends are installed with the notch
toward the inside of the valve body.
Caps with flat ends and a hole through the center are
installed with the smaller hole toward the inside of
the valve bodv.
Toward outsido of valve bodv.
E f l a
Toward inlido ot valve bodv,
Caps with flat ends and a groove around the cap are
installed with the grooved side toward the outside of
the valve body.
Toward oulsido of valv6 body.
"-\"h
,A
\za9
Sectional view.
Toward insido ol valvo body.