Honda Civic Service Manual page 620

Transmission
Reassembly
NOTE: The steel balls are all ofthe same size (5/16 in).
1. Install the magnet and reverse lock cam.
2.
Set shift arm A on the clutch housing, then install
the shift rod.
3.
Install the spring washer and shift arm A attaching
bolt.
Installthe steel ball, spring, and set ball spring bolt.
Install shift arm B in the interlock, then set it on the
clutch housing.
1 .
Insert shift arm shaft in the clutch housing.
Install the collar, spring. and steel ball into the case.
Compress the ball and insert the shift arm shaft,
Install shift arm C in shift arm A, then insert the shift
arm shaft.
Install the reverse select retainer and reverse select
spring onto shift arm shaft.
Install the differential assembly.
5.
8 .
9.
1 0 .
A : 8 x 1 . 0 m m
3'l N,m (3.2 kgt.m,23 lbf.ft)
6 x 1 . 0 m m
15 N.m 11.5 kgt.m, 11 lbt'ftl
OIL SEAL
Replace.
SI{IFT ARM C
COLLAR
REVERSE SELECT SPRING
L. 63.4 mm 12.50 in)
REVERSE LOCK CAM
REVERSE SELECT RETAINER
sHtFT ARM ' ___\.*^
rNrERLocK
p
|Jiiill---=l@
MAGNET
SET BALL SPRING BOLT
22 N.m 12.2 kgl.m, 16 lbf'ftl
SPRING
L . 2 5 . 6 m m ( 1 . O 1 i n )
SHIFT AFM A
CLUTCH
HOUSING
SHIFT ARM SHAFT
(cont'd)
1 3 - 3 9
SHIFT ROD
\ r l
BOOT