Pump outlet line
(high pressure,
/
Pump inlet Iine
(low-pressure)
Replace the housing O-rings
lf the housing still leaks, rePlace
the pumP.
Reservoir is overfilled
Pull off the hose and drain the
reservoit to the Proper level.
Air leak in suction side ofthe sys'
tem (reservoir, inlet hose, tront
pump seal).
Tighten the fifting. lI it's still leak-
ing, replace the O-ring or feed line.
L e a k i n g a t t h e t h r e a d e d f i t t i n g
Leaking at the swagged joint.
Leaking because ol damage, dete_
rioration, or imProPer assemblY.
Reolace or rePair as necessarY.
t J
17-29