Honda Civic Service Manual page 1111

I
l . /
2 6 . C h e c k f o r w e a r . b u r r s a n d o t h e r d a m a g e t o t h e
edges of the grooves in the sleeve'
NOTE: The pinion shaft and sleeve are a precision
m a t c h e d s e t l f e i t h e r t h e p i n i o n s h a f t o r s l e e v e
must be replaced, replace both parts as a set'
SLEEVE SEAL RINGS
Check for Peel off or
damage.
27. Remove the circliP and Pi
pinion shaft.
nion shaft sleeve from the
1 . ,
-r
t rt
.<
l
r - 9 9
28. Using a cutter or an equivalent tool, cut and remove
the lour seal rings from the sleeve'
CAUTION: Be careful not to damage the edges of
the slgevs grooves and outer surface whsn lemov-
ing the seal rings.
29.
Using a cutter or an equivalent tool, cut the valve
seal iing and O-ring at the groove the pinion shaft'
Remove the valve seal ring and O-ring'
CAUTION: Be careful not to damage the edges oI
the pinion shaft gloove and outer surface when
removing the valve seal ling and O-ring'
VALVE SEAL RING
Replace.
(cont'd)
SLEEVE
C u t t i n g s l o t P o s r t l o n .