Honda Civic Service Manual page 1254

Doors
Glass Adjustment {cont'd)
c.
Tighten the roller guide bolts.
d. Loosen the front channel bolts.
e.
Lower the glass.
f.
Push the front channel against the glass, then
tighten the mounting bolts.
MOUNTING
BOLT
3.
Check that the glass moves smoothly.
4.
Raise the glass fully and check for gaps.
5.
Check the glass operation.
NOTE: Check that the glass contacts the glass run
channel evenly.
WEATHERSTRIP
GLASS
U
- \ ,
20-22
6. Check for water leaks.
Spray water over the roof and on the sealing area
as shown.
NOTE:
. Adjust the water pressure as shown.
.
Do not squeeze the tip of the hose.
0.5 m {1.6ft)
HOSE
Attach the plastic cover, then install the door panel
(see pages 20 4, 10, 16).
Install the regulator handle so it points forward and
up at a 45 degree angle with the glass closed.
Forward -
1 .
HOSE
300 mm {11.8 in)