Single Renumbering; Block Renumbering - Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones

Single Renumbering

If your system uses the Set Up Space numbering plan and you want to add,
remove, or move a single extension, use this procedure to single-renumber the
extension jack.
NOTE:
A system forced idle occurs when you perform this task.
Console Procedure
PC Procedure

Block Renumbering

If your system uses the Set Up Space numbering plan and you want to add,
remove, or move a group of extensions, use this procedure to renumber the
group of extensions. Both the original numbers and the numbers they are being
changed to must be sequentially numbered.
NOTE:
A system forced idle occurs when you perform this task.
Console Procedure
PC Procedure
SysRenumber Single
no. Dial new ext.
Enter
no.
Enter Exit
Select item
no. Type new ext. no.
SysRenumber Block
no. of first group member
group member Enter
no. Enter Exit
Select type of group
group member
Type new beginning no.
Select item
Exit
Type old ext.
Select type of group
Enter Dial no. of last
Dial new beginning
Exit Exit
Type no. of first
Type no. of last group member
Issue 1
April 1999
54
Dial old ext.
Dial