Changing Coverage Delay Rings - Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones
Console Procedure
PC Procedure

Changing Coverage Delay Rings

Use this procedure to change coverage delay rings at an extension. Coverage
delay is specified by ring delay settings for each extension.
The Feature Reference provides a full description of Coverage options, including
detailed tables and illustrations that highlight the enhancements provided in
Release 4.1 and later systems. Before programming coverage delays, you
should review this information.
Console Procedure
PC Procedure
Extensions More
Toggle LED on/off or dial ext.
no. Enter Exit
type ext. no.
Change the number of rings before a call is sent to Group
Coverage receivers:
More
Extensions
Dial sender's ext. no.
Group
Dial no. of rings (1 to 9)
Change the delay for Primary Cover buttons programmed
for Delay Ring; change the additional delay before a call
is sent to Group Coverage receivers when Primary or
Secondary Coverage Receivers are available:
Extensions More
Primary Dial sender's ext. no.
Dial no. of rings (1 to 6)
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
More
Extensions
Dial sender's ext. no.
Secondary
Dial no. of rings (1 to 6)
Change the number of rings before a call is sent to Group
Coverage receivers:
More TrkTransfer
Exit
Toggle letter R on/off or
More
Cover Delay
Enter
Enter Exit
More Cover Delay
Enter
Enter Exit
More
Cover Delay
Enter
Enter Exit
Issue 1
April 1999
61
Exit
Exit
Exit