Programming For Maintenance Alarms - Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones
You can specify up to four telephones to receive the MWI when a fax
transmission is received. Fax machines can only send and not receive MWIs.
Console Procedure
PC Procedure

Programming for Maintenance Alarms

Use this procedure to identify the line/trunk jack that connects an external
alerting device that sounds or flashes when major maintenance problems occur.
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its line/trunk
jack to connect a loudspeaker paging system or Music-On-Hold.
Console Procedure
PC Procedure
To program an extension for a fax machine:
AuxEquip Fax
Enter Exit
To have a message waiting light for a fax machine:
Fax Extension
Exit Msg Waiting
no. Dial MWI ext.
Enter
no.
Enter Threshold
seconds (0 to 30)
To program an extension for a fax machine:
To have a message waiting light for a fax machine:
Type ext. no.
Type fax machine ext. no.
no.
(0 to 30)
AuxEquip MaintAlarms
no.
Enter
Exit
Type line/trunk no.
Dial ext. no.
Extension
Dial ext. no.
Enter
Dial fax machine ext.
Drop
Enter Exit
Type ext. no.
Type MWI ext.
+ I
Type no. of seconds
Dial line/trunk
Issue 1
April 1999
76
Dial no. of
Exit