Programming For Fax Machines - Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones
loudspeaker paging systems can be connected to the system. Note the following
conditions:
• You cannot assign the line/trunk identified for loudspeaker paging
equipment use to a line/trunk pool. If the line/trunk is currently assigned to a
pool, you must remove it before you program this option.
• You cannot assign the line/trunk identified for loudspeaker paging
equipment use as a Remote Access line/trunk.
• You cannot use its jack for Music-On-Hold or maintenance alarm.
Console Procedure
PC Procedure

Programming for Fax Machines

Use this procedure to assign the extension jack used to connect the fax
machine. To remove a fax machine and free the extension jack for another use,
you must remove the extension jack assignment.
In addition, you can specify the extensions to receive a message-waiting
indication (MWI) when a fax transmission is received, and specify the length of
time before the system registers that a fax has arrived and sends the MWI.
A maximum of 16 fax machines can use the Fax Message Waiting feature.
Additional fax machines (more than 16) can be installed, but these machines
cannot use this feature.
NOTE:
Fax machines should not be connected to analog multiline telephones
with a General-Purpose Adapter (GPA). In a GPA configuration,
features cannot be assigned to the fax machine independently of the
telephone.
AuxEquip Ldspkr Pg
no. Enter
Exit
Type line/trunk no.
April 1999
Dial line/trunk
Issue 1
75