Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference page 65

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones
• On the MLS-12 and MLS-12D telephones, some features and lines may be
assigned to telephone buttons that do not have lights. You may want to
reassign the features or lines to buttons with lights. To do this, see
"Assigning/Unassigning ICOM or SA Buttons" on page
• The system software cannot distinguish between ETR-6 and MLS-6
telephones; it sees the two telephones as one type of telephone. The
default button assignments, however, are different. You should change the
MLS-6 button assignments to the ETR-6 assignments to reduce confusion.
To do this, see
• If you need to program a 412 LS-ID-ETR or 016 ETR module for tip/ring
functionality, see
ETR Modules" on page
• If the telephone you are adding or removing is an analog multiline
telephone and does not have a built-in speakerphone (BIS) or Hands-Free
Answer on Intercom (HFAI), you must identify it as such to the system. See
"Identifying Analog Multiline Telephones without BIS or HFAI Capability" on
page 57.
• If the telephone you are adding or removing is an analog multiline
telephone and requires a dedicated pair of extension jacks to provide the
Voice Announce feature when the telephone is busy, you must identify it as
such to the system. See
Voice Announce Feature" on page
• If you are adding a Business Cordless 905 telephone or a TransTalk MDC
or MDW telephone connected through an ETR module, the system assigns
buttons the same as those assigned for an MLS-12D telephone.
• If the telephone you are adding or removing is an analog multiline
telephone and requires a dedicated pair of extension jacks to provide voice
and data features, you must identify it as such to the system. See
"Identifying Analog Multiline Telephones at Data Workstations" on page
• To program or remove any additional features to the extension, refer to
"Optional Telephone Features," "Optional Group Features," and "System
Features" in Chapter 3 in System Programming .
"Assigning/Unassigning ICOM or SA Buttons" on page
"Programming for Tip/Ring on 412 LS-ID-ETR and 016
56.
"Identifying Analog Multiline Telephones for the
58.
Issue 1
April 1999
55.
55.
58.
53