Lucent Technologies MERLIN LEGEND Release 7.0 System Manager's Quick Reference page 46

MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Getting Started
System Overview
Constraints Identified in Hardware and Software Capacities Table
Calling Groups
Carriers
Coverage Groups
CTI Link
Fax Machines with
Message-Waiting
Constraints
Members of groups . QCCs cannot be members of
calling groups because the QCC position is set up as a
system operator and has its own queue that is different
from the group's queue.
Members per group . The maximum number of local
extensions in a calling group is 20. The maximum
number of non-local extensions in a calling group is 1. A
calling group cannot contain both local and non-local
extensions.
Primary and Secondary Delay Announcements . With
Release 5.0 and later systems, up to 10 primary and 1
secondary announcement device can be designated for
each calling group. Each announcement device
decreases the 200 tip/ring station capacity.
The first slot of the basic carrier is used for the
processor module with a maximum of 5 port/board slots.
Senders per group . QCCs cannot be senders because
they do not have coverage available and use
Position-Busy instead.
One CTI link is supported in Hybrid/PBX mode only.
The system can support more than 16 fax machines, but
those in excess of 16 cannot use fax message-waiting
indication.
Issue 1
April 1999
34