MERLIN LEGEND Communications System R7.0
System Manager's Quick Reference 555-670-119
Managing the System
Managing Telephones
Programming for Voice Messaging System and
Automated Attendant
Use this procedure to specify the touch-tone duration and the interval between
digits in codes sent between a voice messaging system and the communications
system. The touch-tone duration and interval between digit assignment must be
the same as those programmed on the voice messaging system.
In addition, this procedure can be used to specify the number of rings before a
call transferred to a local extension by the voice messaging system is sent to the
backup position for both integrated and generic VMI ports. The number of rings
cannot be programmed for individual voice messaging systems; the single
setting applies for all.
SECURITY ALERT:
See "Security Risks Associated with the Automated Attendant
Feature of Voice Messaging Systems" and "Security Risks
Associated with Transferring through Voice Messaging Systems"
in Appendix A of System Programming for details on preventing
toll fraud.
Console Procedure
PC Procedure
AuxEquip
VMS/AA
al no. of rings (0 to 9)
Duration
Drop
increments of 25)
Drop
Dial no. of ms (50 to 200 in increments of 25)
Enter
Exit
Exit
9)
+
increments of 25)
ms (50 to 200 in increments of 25)
TransferRtn
Enter
TT
Dial no. of ms (50 to 200 in
Enter
TT Interval
I
+
Type no. of rings (0 to
I
Type no. of ms (50 to 200 in
+
Issue 1
April 1999
77
Drop
Di
I
Type no. of
Need help?
Do you have a question about the MERLIN LEGEND Release 7.0 and is the answer not in the manual?
Questions and answers