Sntp Settings; Time Zone Settings - D-Link xstack DES-3810 series Reference Manual

®
xStack

SNTP Settings

Users can configure the time settings for the Switch.
To view the following window, click Network Application > SNTP > SNTP Settings, as shown below:
The fields that can be configured or displayed are described below:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second Server
SNTP Poll Interval In
Seconds (30-99999)
Click the Apply button to accept the changes made.

Time Zone Settings

Users can configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click Network Application > SNTP > Time Zone Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 10-27 SNTP Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
375