Event Codes - HP StorageWorks 2/140 - Director Switch Product Manager Manual

• Date/Time—The date and time of the event on the director.
• Event—Events are identified by a unique code. Event codes include:
Table 4–1: Event Codes
Code
000–199
200–299
300–399
400–499
500–599
600–699
800–899
The following acronyms may display in this column for the port card:
— GLSL—G_Port, long wave, single mode LC connector, 1 Gigabit
— GSML—G_Port, short wave, multimode, LC connector, 1 Gigabit
— GXXL—G_Port, mixed mode, LC connector, 1 Gigabit
— FPM—G_Port, small form factor optics (SFO) pluggable, FICON port
module, 1 Gigabit
— UPM—G_Port, small form factor optics (SFO) pluggable, universal port
module, 2 Gigabit
— GSF2—GPort, small form factor optics (SFO) pluggable, universal port
module, 2 Gigabit
— GLSR—G_Port, short wave, single mode, MT-RJ connector, 1 Gigabit
— GXXR—G_Port, mixed mode, MT-RJ connector, 1 Gigabit
— GSMR—G_Port, short wave, multimode, MT-RJ connector, 1 Gigabit.
The chassis (slot) position for a nonredundant FRU is 0. The chassis positions for
redundant FRUs are 0, 1, and 2. The chassis positions for port cards are
0 through 35, and slot 32 is unavailable.
• Description—A short description of the event.
• Severity—There are four classifications of severity that identify the importance of
the event.
director product manager user guide
Event
System events
Power supply events
Fan module events
CTP card events
Port card events
SBAR card events
Thermal events
Using Logs
4–5