Reset Configuration Data - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Repair Information

Reset Configuration Data

Note:
disrupt server-to-switch communication. All optional features are disabled.
To reset the switch data to the factory default settings:
1. Notify the customer the switch is to be set offline. Ensure the customer's
2. Set the switch offline
3. At the HAFM server, open the HAFM application. The Product View
4. Select the icon representing the switch for which a configuration file is to be
5. At the navigation control panel, select Reset Configuration from the
6. Click Reset. When the reset process finishes, the dialog box closes and the
7. The switch IP address resets to the default address of 10.1.1.10.
8. To change the switch IP address and restart the HAFM server session, go to
9. To restart an HAFM server session using the default IP address of 10.1.1.10:
168
This procedure resets the switch IP address to the default of 10.1.1.10 and may
system administrator quiesces Fibre Channel frame traffic through the switch
and sets attached devices offline.
displays.
reset to factory default settings. The Hardware View for the selected switch
displays.
Maintenance menu. The Reset Configuration dialog box displays.
application returns to the Hardware View.
— If the configured IP address (prior to reset) was the same as the default
address, the switch-to-HAFM server Ethernet link is not affected and the
procedure is complete.
— If the configured IP address (prior to reset) was not the same as the default
address, the switch-to-HAFM server Ethernet link drops and HAFM
server communication is lost. Continue to the next step.
step 10.
a. Close the Edge Switch 2/24 Product Manager application and return to
the Products View.
("Set Offline State" on page 151).
Edge Switch 2/24 Service Manual