Figure 120. Attaching The Mvr To The Processor Assembly; Figure 121. Installing The Handles Onto The Mvr - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual
Product guide
Hide thumbs
Also See for SR9000MK4U - Server System - 0 MB RAM:
- Operating system installation manual (16 pages)
Table of Contents
Advertisement
16. Use a Torx-15 screwdriver to tighten the four screws at the corners of the MVR.
Use a torque level of 0.68[N.m] (6.9[kgf.cm]). See letter "B" in the figure below.
17. Use a Torx-15 screwdriver to tighten the two screws on the LGA terminal. See
letter "A" in the figure.
18. Press the MVR handles into place on each side of the MVR. See the figure below.
120
Figure 120. Attaching the MVR to the Processor Assembly
Figure 121. Installing the Handles onto the MVR
B
A
AF001252
®
Intel
Server System SR9000MK4U Product Guide
AF001274
Advertisement
Table of Contents
