Installing And Removing The Mounting Plate; Removing The Mounting Plate - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

Installing and Removing the Mounting Plate

Before beginning these steps, power down your server system and unplug all AC power
cords.

Removing the Mounting Plate

To perform this procedure, you first need to remove:
•
The front bezel. For instructions, see
•
The top cover. For instructions, see
•
All installed hard drive carriers. For instructions, see
page
•
The front control panel and optical drive assembly. For instructions, see
the Front Control Panel and Optical Drive Assembly" on page
•
All installed power supplies. For instructions, see
page
•
The power supply filler panel, if one is installed. For instructions, see
Power Supply" on page
•
The power supply box. For instructions, see
page
•
The power supply support. For instructions, see
Support" on page
•
The hard drive backplane cover. For instructions, see
Backplane Cover" on page
•
The KVM card, if it is installed. For instructions, see
page
•
All installed PCI cards. For instructions, see
•
The PCI card divider. For instructions, see
page
•
The air flow guide. For instructions, see
page
•
All installed fans. For instructions, see
•
The fan box. For instructions, see
Remove these components, in order, before beginning the steps below. In addition, if you
are replacing your mounting plate and intend to reinstall your existing processors onto the
new mounting plate, you will need to remove the processor assembly. For instructions, see
"Removing a Processor" on page
®
Intel Server System SR9000MK4U Product Guide
40. Follow steps 1 through 3 only.
70.
68. Follow step 2 only.
76.
83.
87.
89.
91.
95.
"Removing the Front Bezel" on page
"Removing the Top Cover" on page
"Removing a Power Supply" on
"Removing the Power Supply Box" on
"Removing the Power Supply
"Removing a PCI Card" on page
"Removing the PCI Card Divider" on
"Removing the Air Flow Guide" on
"Removing a Fan" on page
"Removing the Fan Box" on page
111.
34.
36.
"Removing a Hard Drive" on
"Removing
74.
"Installing a
"Removing the Hard Drive
"Removing the KVM Card" on
57.
98.
63.
125