Intel SR9000MK4U - Server System - 0 MB RAM Product Manual page 42

Board
Location
P9
P10
P11
P12
P13
P14
P15-P20
Attention
Switch
P21
P22-P27
Power LED
P28-P33
Attention LED
20
Table 7. Main Board Components
Component
LSI Logic* SAS1068 PCI-X* to 3 Gb/s 8-port SAS controller. Four of the
eight ports are used.
H8S/2166 Baseboard management controller (BMC)
SIO Super I/O
FPGA Management interface and shared memory extension
bridge
Battery CMOS backup
ID SW This is a button combined with an LED. It can be used
to identify a particular system and is useful in locating
a particular system among many. The first time the
button is pressed, the LED turns on. If the button is
pressed again, the LED will blink and then turn off.
PCI-X* / PCI-
Express* slot
Switch used for hot
swapping PCI cards.
7SEG LED Indicates POST code
PCI-X/e slot
LED to indicate an
active PCI slot status
PCI-X / PCI-Express*
slot
LED to indicate an
error other PCI card
slot condition. See
"PCI Card Slot" on
page 15.
Description
•
1.5 and 3 Gb/s SAS and SATA data transfer
rates per port, full duplex
•
64-bit, 133 MHz PCI-X host interface
•
Integrated RAID support
–
Fusion-MPT* architecture
–
Integrated Striping* technology (RAID0)
–
Integrated Mirroring* technology (RAID1)
®
Intel Server System SR9000MK4U Product Guide