Figure 112. Setting The Processor Over The Heat Sink; Figure 113. Securing The Processor To The Heat Sink - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

6. While holding the spring clip in place on the processor, align the positioning pins
on processor with the holes in the heat sink.
7. Set the processor in place over the heat sink. See the figure below.
8. Use a Tork-15 screwdriver to tighten the four screws on the spring clip to secure the
processor to the heat sink. Use a fastening torque of 0.45[N.m] (4.61[kgf.cm]. See
the figure below.
116

Figure 112. Setting the Processor over the Heat Sink

Figure 113. Securing the Processor to the Heat Sink

AF001263
A
®
Intel Server System SR9000MK4U Product Guide
AF001259