Installing And Removing A Fan; Installing A Fan; Figure 45. Locating The Fans - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

Installing and Removing a Fan

You will need to remove the fan(s) to perform the following operations:
•
To replace a fan
•
To install or remove the fan box
•
To install or remove the hard drive backplane
•
To install or remove the mounting plate

Installing a Fan

To perform this procedure, you will first need to remove the top cover. The steps below
will direct you to the instructions to remove the top cover at the appropriate location in the
step sequence.
Before operating the procedures written in this chapter, except when hot-swapping, be
sure to turn off the system and then disconnect all power plugs.
1. Remove the top cover. For instructions, see
2. Locate the fan area of the system. See the following figure.
®
Intel Server System SR9000MK4U Product Guide
"Removing the Top Cover" on page

Figure 45. Locating the Fans

AF001133
36.
55