Installing And Removing Dimms; Dimm Installation Guidelines; Figure 36. Four-Dimm Installation Pattern; Figure 37. Eight-Dimm Installation Pattern - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

Installing and Removing DIMMs

DIMM Installation Guidelines

Each installed memory box must have either four or eight DIMMs installed, as shown
below.
•
Four DIMM installation: Install DIMMs in JD0B1, JD0A1, JD2B1, JD2A1
•
Eight DIMM installation: DIMMs installed in each socket
Note: When facing the front or rear of the memory box, the four sockets at the left are positioned
in the opposite direction from the four sockets at the right. Be sure to reverse the DIMMs
accordingly. Make sure the notches at the center of the DIMMs line up correctly with the
tabs in the center of the sockets.
Note: The system will not boot if a memory box is installed with no DIMMs in it.
48

Figure 36. Four-DIMM Installation Pattern

Figure 37. Eight-DIMM Installation Pattern

AF001124
AF001125
®
Intel Server System SR9000MK4U Product Guide