Intel SR9000MK4U - Server System - 0 MB RAM Product Manual page 176

Location
Cooling Fault LED
Power Fault LED
Video
Keyboard
Mouse
154
Table 30. Troubleshooting Guide
Symptom
System powers on, but then
turns off quickly. Cooling
Fault LED (orange) is on.
After the power-on, cooling
fault LED (orange) is on or
blinks.
After system powers on,
Power Fault LED (orange) is
on or blinks
System turns on, but screen
is blank.
The state of screen is
unusual.
Keyboard does not work.
Mouse does not work
normally.
Intel
Solution
Check that the cooling fan module is
installed properly.
Check that no foreign matter is put in
cooling fan module.
Check that the intake/exhaust air is
flowing.
Check that the cooling fan module is
installed properly.
Check that no foreign matter is put in
cooling fan module.
Check that intake/exhaust air flows.
Check that the power input cable is
properly connected.
Check that the power modules are
installed properly.
Check that the power modules are
configured.
Check that the display is plugged in.
Check that the display is turned on.
Check that the display cable is properly
connected.
Replace the display.
Check that the display cable is properly
connected.
Check that the brightness and contrast
on the display are properly set.
Check that the proper video driver is
installed.
Check that the refresh rate setting
matches the display specification.
Replace the display.
Check that the keyboard USB cable is
properly connected.
Disconnect and reconnect the USB
cable and retry.
Replace the keyboard.
Check that the mouse USB cable is
properly connected.
Disconnect and reconnect the USB
cable and retry.
Replace the mouse.
®
Server System SR9000MK4U Product Guide