4. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
— Install the top cover. For instructions, see
Installing and Removing the KVM Card
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the KVM card to perform the following operations:
•
To replace the KVM card
•
To remove the PCI card divider
Removing the KVM Card
To perform this procedure, you will first need to remove:
•
The top cover. For instructions, see
•
All installed power supplies. For instructions, see
page
•
The power supply filler panel, if one is installed. For instructions, see
Power Supply" on page
•
The power supply box. For instructions, see
page
®
Intel
Server System SR9000MK4U Product Guide
A
Figure 90. Checking the Backplane Cover Latches
procedure.
70.
68. Follow step 2 only.
76.
"Installing the Top Cover" on page
"Removing the Top Cover" on page
"Removing a Power Supply" on
"Removing the Power Supply Box" on
AF001218
37.
36.
"Installing a
89