Figure 40. Attaching The Optical Drive To The Bracket; Figure 41. Installing Of Optical Drive - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

4. With the rear of the optical drive facing you, as shown by letter "A" below, install
the left side of the bracket onto the drive. The bracket (letter "B" in the figure) has a
small tab that fits into a dimple in the drive sheetmetal.
5. Roll the right side of the bracket down until it clicks into place.
6. Slide the optical drive assembly into the system until it clicks into place. See letter
"A" in the figure below.
7. Install the front bezel. For instructions, see
52

Figure 40. Attaching the Optical Drive to the Bracket

Figure 41. Installing of Optical Drive

A B
AF001117
A
AF001130
"Installing the Front Bezel" on page
®
Intel Server System SR9000MK4U Product Guide
35.