Navigating Setup Utility Screens
The system setup utility consists of ten primary menus. Each menu occupies one screen
and displays a list of menu items. Some menu items have sub-menus. The user can modify
the settings of some menu items on the screen. Table 22 describes how to navigate the
utility screens and menus.
Enter key
up arrow
down arrow
Primary Screens
The Configuration Utility uses the primary screens shown in Table 23.
Screen
Main
Processor
Memory
Devices
Server Management
System Information
Save changes and
Exit
146
Table 22. Using Setup Screens
Press
Selects a sub-menu item or changes to next value of a selected item.
Moves up through menu items.
Moves down through menu items.
Table 23. Primary Setup Screens
No configuration settings available.
Configures processor. For details of this screen, see
page
148.
Configures memory. For details of this screen, see
on page
Configures SATA (Not supported in 4S-4U model.) and VGA. For
details of this screen, see
Configures Server Management. For details of this screen, see
Management Screen" on page
Display firmware version, and board, chassis, product information
Stores the changed values in CMOS, and exits setup. Clicking on the
menu item causes the system to prompt the user for a Yes or No
response.
Yes: Saves the changes and reboots the system.
No: Aborts the action.
Description
148."
"Devices Screen" on page
150.
®
Intel
Server System SR9000MK4U Product Guide
To
"Processor" on
"Memory Screen"
149.
"Server