Figure 87. Tightening The Power Supply Support Screws - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

2. Tighten the two captive screws at the bottom of the power supply support. See the
figure below.
3. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
— If you are ready to re-assemble your server system, install the following items,
86

Figure 87. Tightening the Power Supply Support Screws

procedure.
in order:
✧ The power supply box. For instructions, see
Box" on page 80.
✧ All installed power supplies. For instructions, see
on page 68.
✧ The power supply filler panel, if necessary. For instructions, see
Power Supply" on page
✧ The top cover. For instructions, see
"Installing the Power Supply
70. Follow step 4 only.
"Installing the Top Cover" on page
®
Intel Server System SR9000MK4U Product Guide
AF001247
"Installing a Power Supply"
"Removing a
37.