Figure 124. Removing The Bolster Plate From The Processor; Figure 125. Removing The Processor From The Heatsink - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

6. Lift the bolster plate from the LGA terminal on the underside of the heat sink /
processor assembly. See the figure below.
Caution: The processor can be damaged if handled improperly. Do not touch the
7. Use a Torx-15 screwdriver to loosen four spring clip screws. See letter "A" in the
following figure.
®
Intel Server System SR9000MK4U Product Guide
processor pins.

Figure 124. Removing the Bolster Plate from the Processor

Figure 125. Removing the Processor from the Heatsink

AF001253
A
AF001259
123