Intel SR9000MK4U - Server System - 0 MB RAM Product Manual page 126

•
All installed power supplies. For instructions, see
page
•
The power supply filler panel, if one is installed. For instructions, see
Power Supply" on page
•
The power supply box. For instructions, see
page
•
The hard drive backplane cover. For instructions, see
Backplane Cover" on page
•
The KVM card, if it is installed. For instructions, see
page
•
All installed PCI cards. For instructions, see
•
The PCI card divider. For instructions, see
page
•
The air flow guide. For instructions, see
page
•
All installed fans. For instructions, see
•
The fan box. For instructions, see
Remove these components, in order, before beginning the steps below.
The steps below do not guide you through reinstalling the components you are removing
or disconnecting in this step sequence. These steps assume you are removing the hard
drive backplane to either replace it, or to access another component. After completing
these steps, continue with the steps that directed you to this section, or follow the steps
under "Installing the Hard Drive Backplane" on page 107
backplane.
104
70.
68. Follow step 2 only.
76.
87.
89.
91.
95.
"Removing a Power Supply" on
"Removing the Power Supply Box" on
"Removing the Hard Drive
"Removing the KVM Card" on
"Removing a PCI Card" on page
"Removing the PCI Card Divider" on
"Removing the Air Flow Guide" on
"Removing a Fan" on page
"Removing the Fan Box" on page
to replace your hard drive
®
Intel Server System SR9000MK4U Product Guide
"Installing a
63.
57.
98.