Installing The Air Flow Guide; Figure 96. Installing The Air Flow Guide - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

Installing the Air Flow Guide

These steps assume you have removed the air flow guide, as described in
Air Flow Guide" on page 95
1. Place the air flow guide in the chassis.
2. Verify all three hooks in the chassis align with the corresponding three slots in the
air flow guide as shown in the figure below.
3. Route loose cables through the cable guides at the rear of the air flow guide.
4. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
— If you are ready to re-assemble your server system, install the following items,
®
Intel Server System SR9000MK4U Product Guide
and your system is partially disassembled.

Figure 96. Installing the Air Flow Guide

procedure.
in order:
✧ The PCI card divider. For instructions, see
on page 93.
"Removing the
AF001231
"Installing the PCI Card Divider"
97