Installing And Removing The Power Supply Support; Removing The Power Supply Support - Intel SR9000MK4U - Server System - 0 MB RAM Product Manual

9. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
— If you are ready to re-assemble your server system, install the following items,
Installing and Removing the Power Supply
Support
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the top cover to perform the following operation:
•
To install or remove the mounting plate

Removing the Power Supply Support

To perform this procedure, you will first need to remove:
•
The top cover. For instructions, see
•
All installed power supplies. For instructions, see
page
•
The power supply filler panel, if one is installed. For instructions, see
Power Supply" on page
•
The power supply box. For instructions, see
page
Remove these components, in order, before beginning the steps below.
The steps below do not guide you through reinstalling the components you are removing
or disconnecting in this step sequence. These steps assume you are removing the power
supply support to either replace it, or to access another component. After completing these
steps, continue with the steps that directed you to this section, or follow the steps under
"Installing the Power Supply Support" on page 85
®
Intel Server System SR9000MK4U Product Guide
procedure.
in order:
✧ All installed power supplies. For instructions, see
on page 68.
✧ The power supply filler panel, if necessary. For instructions, see
Power Supply" on page
✧ The top cover. For instructions, see
70.
68. Follow step 2 only.
76.
70. Follow step 4 only.
"Installing the Top Cover" on page
"Removing the Top Cover" on page
"Removing a Power Supply" on
"Removing the Power Supply Box" on
to replace your power supply support.
"Installing a Power Supply"
"Removing a
37.
36.
"Installing a
83