Replacing The Server Board; Removing The Server Board - Intel SR1630GP - Server System - 0 MB RAM Service Manual

Replacing the Server Board

Removing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Detach all cables connected to the server board.
7. Remove the heat sink and the processor. For instructions, see
Sink and Processor" on page
8. Remove the DIMMs. For instructions, see
68
iii.
30.
33.
61.
39.
®
Intel Server System SR1630GP / SR1630HGP Service Guide
"Removing the Server
"Removing the Processor Air
"Removing the PCIe*
"Removing the Heat
"Removing DIMMs" on page
"Safety
37.