®
Intel
Server System SR1630HGP Contents
Your Intel
•
One Intel
•
One 350-W power supply module, installed in the server system
•
Two system blower fans, with attached cables, installed in the server system:
•
One passive heat sink, mounted behind the hard drives, next to the blower fans in the
server system
•
Three hot-swap hard disk drive carriers, installed in the server system.
•
One air baffle in the server system product box.
•
One slimline optical drive installation kit, in the server system product box.
•
One PCI-E x 8 low profile riser card with supporting bracket, installed in the server
system.
•
Screws:
— One M2 screw for attaching the bracket to slim optical drive.
— One M3 screw for attaching the slim optical drive to the server system.
— One 6-32# screw for attaching the air baffle to the serve system.
•
Rack handles, in the server system product box
•
Standard front panel, installed in the server system
•
Standard HDD backplane, installed in the server system.
•
One rail kit, in a separate box
•
Cables:
— Three SATA cables, installed in the server system
— One front panel USB cable, installed in the server system
— One front panel cable, installed in the server system
— One SPGIO cable, installed in the server system.
•
Documentation, drivers, and installation CD
®
Intel
Server System SR1630GP/SR1630HGP Service Guide
®
Server System SR1630HGP ships with the following items:
®
Server Board S3420GPLC installed in the server system
ix