Installing And Removing A Pci Add-In Card; Installing A Pci Add-In Card - Intel SR1630GP - Server System - 0 MB RAM Service Manual

12. Install the server system cover. For instructions, see
Cover".
13. Plug all peripheral devices and the AC power cable into the server.

Installing and Removing a PCI Add-in Card

Caution: The add-in cards are NOT hot-swappable. Before removing or replacing an add-in card,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.

Installing a PCI Add-in Card

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
®
Intel Server System SR1630GP / SR1630HGP Service Guide
iii.
30.
61.
"Installing the Server System
"Removing the Server
"Removing the PCIe*
"Safety
65