Replacing The Server Board; Removing The Server Board; Figure 48. Removing The Server Board - Intel SR1630BC - Server System - 0 MB RAM Service Manual
Server system
Hide thumbs
Also See for SR1630BC - Server System - 0 MB RAM:
- Spares parts list & configuration manual (22 pages) ,
- Documentation update (19 pages) ,
- Technical product specification (56 pages)
Table of Contents
Advertisement
Replacing the Server Board
Removing the Server Board
1. Remove the CPU air duct and air baffle.
2. If installed, remove the memory, processor heat sinks, and processors from the
server.
3. If installed, remove the PCI riser assembly.
4. If installed, disconnect all SATA cables from the server board.
5. Remove the system PCI fan and blower cables.
6. Disconnect all power cables coming from the power supply to the server board.
7. Remove the seven screws from the server board (see letter "A") and lift the server
board from the server system (see letter "B").
8. Install the replacement server board. See
52
Figure 48. Removing the Server Board
"Installing the Server Board" on page
®
Intel
Server System SR1630BC Service Guide
-53.
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1630BC - Server System - 0 MB RAM and is the answer not in the manual?