Table of Contents
Advertisement
Appendix A: Technical Reference
Cable Routing
When you add or remove components from your server system, make sure your cables are
routed correctly before reinstalling the server system cover. Use caution to make sure no
cables or wires are pinched and that the airflow from the fans is not blocked. Use the
following figures to determine the correct cable routing.
For readability, separate figures for power cable routing and data cable routing are
included. Make sure all necessary power and data cables are connected and routed as
shown. Dashed lines in the drawings indicate a location where a cable is routed beneath a
component and each connector end is labeled with the same letter. For example, the PCI
cooling fan cable is labeled with the letter "C" both where it connects to the server board
and at the PCI cooling fan itself.
®
Intel
Server System SR1630GP / SR1630HGP Service Guide
97
Advertisement
Table of Contents
