Peripheral Devices (Sr1630Gp); Peripheral Devices (Sr1630Hgp); Hard Disk Drives - Intel SR1630GP - Server System - 0 MB RAM Service Manual

Peripheral Devices (SR1630GP)

The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay HDD0 (located under the slimline optical drive bay)
•
Hard Disk Drive Bay HDD1

Peripheral Devices (SR1630HGP)

The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Three Hard Disk Drive Bays

Hard Disk Drives

The Intel
SATA ports are near the front left side of the server board.
For instructions on installing hard drives, see
(SR1630GP)" on page
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a
maximum ambient temperature of 45
Note: The Intel
(SATA) hard drives. See
list of supported hardware.
®
Intel Server System SR1630GP / SR1630HGP Service Guide
®
Server System SR1630GP/SR1630HGP provides six SATA ports. The six
44.
®
Server System SR1630GP / SR1630HGP does not support all Serial ATA
"Server System References" on page x
"Installing and Removing a Hard Drive
C.
°
for an Internet link to a
9