Table of Contents
Advertisement
Installing and Removing Memory
Caution: The memory is NOT hot-swappable. Before removing or replacing any memory DIMM,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1,
and DIMM B2 starting from the center of the board. See
discussion of the memory requirements and options. See
page x
for a link to the list of tested DIMMs.
36
Figure 23. Installing the Processor Air Duct (SR1630HGP)
Intel
"Memory" on page 14
"Server System References" on
®
Server System SR1630GP / SR1630HGP Service Guide
AF003251
for a
Advertisement
Table of Contents
