7. Insert the replacement power supply at an angle into the server system, sliding the
power connector side in first to fit it through the cut-out area at the rear of the
system (see letter "A" in Figure 64).
8. Set the front of the power supply down pushing the power supply back so it fits
behind the foot at the bottom of the chassis (see letter "B" in Figure 64).
Figure 64. Installing Power Supply Module into the Server System
9. Connect the power supply cables to the server board and peripherals.
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable into the server (see letter "C" in
Figure 64).
80
(SR1630HGP)
®
Intel
Server System SR1630GP / SR1630HGP Service Guide
AF003268
"Installing the Server System