Installing The Server Board - Intel SR1630GP - Server System - 0 MB RAM Service Manual

16. Install the server system cover. For instructions, see
Cover".
17. Plug all peripheral devices and the AC power cable into the server.

Installing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Place the server board into the server system as shown by letter "A" in Figure 57.
7. Attach the server board with nine screws. See letter "B" in Figure 57.
70
iii.
30.
33.
61.
®
Intel Server System SR1630GP / SR1630HGP Service Guide
"Installing the Server System
"Removing the Server
"Removing the Processor Air
"Removing the PCIe*
"Safety