Table of Contents
Advertisement
5. HDD1 location only: Slide the power cables from the cable clip located on the top
of the hard drive carrier.
6. Remove the screw that holds the hard drive bracket to the chassis. See letter "A" in
Figure 32. Save this screw. You will use it to reinstall the drive assembly later.
7. Lift the drive carrier from the chassis. See letter "B" in Figure 32.
Figure 32. Removing Drive Carrier from the Server System (SR1630GP)
®
Intel
Server System SR1630GP / SR1630HGP Service Guide
Figure 31. Locating Drive Positions (SR1630GP)
A
B
AF001050
AF003252
45
Advertisement
Table of Contents
