Replacing The Server Board; Removing The Server Board; Figure 43. Installing The Backplane Board - Intel SR1690WB - Server System - 0 MB RAM Service Manual
A guide for technically qualified assemblers of intel identified subassemblies/ products
Hide thumbs
Also See for SR1690WB - Server System - 0 MB RAM:
Table of Contents
Advertisement
Replacing the Server Board
Removing the Server Board
1. Remove the system air duct.
2. If installed, remove the memory, processor heat sinks, and processors from the
server.
3. If installed, remove the PCI riser assembly.
4. If installed, disconnect all SATA cables from the server board.
5. Disconnect the system fans cables from server board.
6. Disconnect all power cables coming from the power supply to the server board.
®
Intel
Server System SR1690WB Service Guide
C
Figure 43. Installing the backplane board
B
A
AF003301
53
Advertisement
Table of Contents
