Page 1 ® Intel Server System SR1630GP / SR1630HGP Service Guide ® A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/ Products Intel Order Number E73400-004...
Page 2 Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel product could create a situation where personal injury or death may occur.
Page 3: Safety Information
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the ® Intel Server Deployment Toolkit CD and/or at http://support.intel.com/support/...
Page 4 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 5: Warnings
Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 6 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 7: Preface
This includes how to navigate through the BIOS Setup screens, perform a BIOS update, and reset the password or CMOS. Information about the ® specific BIOS settings and screens is available in the Intel Server Board S3420GP Technical Product Specification.
Page 8: Product Contents
Server System SR1630GP/SR1630HGP ships with the Intel Server Board S3420GPLC. ® There are two versions of this server system: the Intel Server System SR1630GP and the ® Intel Server System SR1630HGP. The contents of each server system are listed below.
Page 9: Intel ® Server System Sr1630Hgp Contents
® Intel Server System SR1630HGP Contents ® Your Intel Server System SR1630HGP ships with the following items: ® • One Intel Server Board S3420GPLC installed in the server system • One 350-W power supply module, installed in the server system •...
Page 10: Server System References
Guide in the product box. install it Accessories or other Intel Spares/Parts List & Configuration Guide server products This is available from your Intel field representative or on the Server Configurator Tool at: http://www.intel.com/support/motherboards/server/s3420gp/ howto.htm Hardware (peripheral For the Tested Hardware Operating Systems List, you can go to the ®...
Page 11 For this Information or Use this Document or Software Software For diagnostics test Diagnostics software http://support.intel.com/support/motherboards/server/S3420GP/ ® Intel Server System SR1630GP/SR1630HGP Service Guide...
Page 12 ® Intel Server System SR1630GP/SR1630HGP Service Guide...
Page 13: Table Of Contents
Warnings ..........................v Preface ........................vii About this Manual ........................ vii Manual Organization ......................vii Product Contents .........................viii ® Intel Server System SR1630GP Contents ..............viii ® Intel Server System SR1630HGP Contents ............... ix Server System References ....................x Chapter 1: Server System Features ................1 Chassis Component Identification ..................
Page 14 Removing the PCIe* Riser Assembly ................61 Installing the PCIe* Riser Assembly ................62 Installing or Replacing a PCIe* Riser Card ................. 63 Removing a PCIe* Riser Card ..................63 Installing a PCIe* Riser Card ..................64 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 15 Drive Activity Light Does Not Light ................108 CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light ......108 Cannot Connect to a Server ..................108 Problems with Network ....................109 System Boots when Installing PCI Card ..............110 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 16 Domaines d’utilisation prévus ................... 136 Sélection d’un emplacement ..................136 Pratiques de manipulation de l’équipement .............. 137 Alimentation et avertissements en matière d’électricité ..........138 Avertissements sur l’accès au système ..............138 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 17 VCCI (Japan) ......................164 BSMI (Taiwan) ......................165 Korean Compliance (RRL) ..................165 End-of-Life / Product Recycling ..................165 Appendix F: Warranty .................... 167 ® Limited Warranty for Intel Chassis Subassembly Products ..........167 Appendix G: Getting Help ..................171 World Wide Web ........................171 Telephone ..........................171 ®...
Page 18 ® xviii Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 19: List Of Figures
List of Figures ® Figure 1. Intel Server System SR1630GP ................1 ® Figure 2. Intel Server System SR1630HGP................2 Figure 3. Front Controls and LEDs (SR1630GP) ..............5 Figure 4. Front Controls and LEDs (SR1630HGP) ..............7 Figure 5. Back Panel Connectors....................8 Figure 6.
Page 20 Figure 77. Installing the Rack Handle ..................94 Figure 78. Removing the Rack Handle ................... 95 Figure 79. Power Cable Routing (SR1630GP) ............... 98 Figure 80. Data Cable Routing (SR1630HGP) ............... 99 Figure 81. Cable Routing (SR1630HGP)................100 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 21 ® Table 2. Intel Server System SR1630GP Control Panel LED Functions ........ 5 Table 3. Intel® Server System SR1630HGP Control Panel LED Functions ......7 Table 4. NIC LED Descriptions ....................8 Table 5. Channel Slot Configuration ..................17 Table 6. Setup Menu Key Use ....................20 Table 7.
Page 22 ® xxii Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 23: Chapter 1: Server System Features
® Figure 1. Intel Server System SR1630GP Note: Figure 1 is shown with an optional optical drive installed.
Page 24: Figure 2. Intel ® Server System Sr1630Hgp
® Figure 2. Intel Server System SR1630HGP Note: Figure 2 is shown with an optional optical drive installed. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 25: Table 1. Intel ® Server System Sr1630Gp / Sr1630Hgp Feature Summary
23 pounds (10.43 kilograms) ® Server Board Intel Server Board S3420GPLC ® ® Processor Supports for one Intel Xeon 3400 Series Processor in FC-LGA 1156 socket package. • 2.5 GT/s point-to-point DMI interface to PCH • LGA 1156 pin socket...
Page 26 ® Table 1. Intel Server System SR1630GP / SR1630HGP Feature Summary Feature Description • One Gigabit Ethernet device 82574L connect to PCI-E x1 interfaces on the PCH • One Gigabit Ethernet PHY 82578DM connected to PCH through PCI-E x1 interface...
Page 27: Chassis Component Identification
Power Button NIC1 LED System Status LED NIC2 LED System Power LED Figure 3. Front Controls and LEDs (SR1630GP) ® Table 2. Intel Server System SR1630GP Control Panel LED Functions Color State Description NIC 1 / NIC 2 Green NIC Link / AC is on / no access...
Page 28: Table 2. Intel ® Server System Sr1630Gp Control Panel Led Functions
® Table 2. Intel Server System SR1630GP Control Panel LED Functions Color State Description System Green Running / normal operation Status (on Blink System ready, but degraded standby power) Amber Critical or non-recoverable condition. Possible critical power module failure, critical fan failure, voltage (power...
Page 29: System Front Panel (Sr1630Hgp)
NIC2 LED USB Port Power LED Power Button System Status LED Figure 4. Front Controls and LEDs (SR1630HGP) Table 3. Intel® Server System SR1630HGP Control Panel LED Functions Color State Description NIC 1 / NIC 2 Green NIC Link / System is On...
Page 30: System Rear
LAN link is established. Blinking LAN activity is occurring. 10 Mbit / sec data rate is selected Green 100 Mbit / sec data is selected Yellow 1000 Mbit / sec data rate is selected ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 31: Peripheral Devices (Sr1630Gp)
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a maximum ambient temperature of 45 ° ® Note: The Intel Server System SR1630GP / SR1630HGP does not support all Serial ATA (SATA) hard drives. See “Server System References” on page x for an Internet link to a list of supported hardware.
Page 32: Slimline Optical Drive Carrier
One slimline drive carrier is included with your server system; you must purchase the optical drive separately. To use the slimline DVD drive provided by Intel, use order code AXXSATADVDROM. To use the slimline DVD CDRW drive provided by Intel, use order code AXXSATADVDRWROM.
Page 33: Internal Components (Sr1630Gp)
Server Board System Blower Fans (two) Processor Air Duct Hard Drive Bays PCIe* Riser Assembly Front Panel Processor and Heatsink Slimline Optical Drive Bay Power Supply Figure 6. System Components (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 34: Internal Components (Sr1630Hgp)
Front Panel Processor Air Duct Hard Drive Carriers (two) Server Board Slimline Optical Drive Bay PCIe* Riser Assembly M. Hard Drive Carrier (one) Processor and Heat Sink Figure 7. System Components (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 35: Server Board Connectors / Components
Server Board Connectors / Components B C D AF003290 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 36: Figure 8. S3420Gp Connector And Component Locations
Slot 2, PCI Express* Gen1 x1 System FAN 2 and System ® (x4 connector) (Intel Server FAN 3 Board S3420GPLX only) Intel RMM3 Connector (Intel® CPU socket Server Board S3420GPLX only) Slot 3, PCI Express* Gen1 x4 CPU Fan connector (PCI Express* Gen2 compliant)
Page 37: Configuration Jumpers
Configuration Jumpers Default Enabled J1A2 Default Enabled J1F1 Default Recover J1F3 Default Password J1F2 Clear Default CLEAR J1F5 CMOS ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 38: Figure 9. Configuration Jumper Descriptions
Jumper in normal position (pins 1-2) allows normal system operation with correct BIOS settings. System will POST normally. ® Jumper in maintenance mode (pins 2-3) allows Intel AMT setting/ password reset. Jumper removed is used to recover from a corrupted BIOS.
Page 39: Hardware Requirements
Xeon 3400 processor series with ® ® 95 W Thermal Design Power (TDP) with 2.5 GT/s or one Intel Xeon processor 3400 series with 65 W TDP with 2.5 GT/s. For a complete list of supported processors, see the links under “Server System...
Page 40 DIMM timings (RAS latency, CAS latency, etc.). ® ® The Intel SAS Entry RAID Module option is enabled by default once the Intel Entry RAID Module. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 41: Chapter 2: Server Utilities
You can run BIOS Setup with or without an operating system ® present. See the links under “Server System References” on page x for a link to the Intel Server Board S3420GP Technical Product Specification where you will find details about specific BIOS setup screens. Starting Setup You can enter and start BIOS Setup under several conditions: •...
Page 42: Table 6. Setup Menu Key Use
If “No” is selected and <Enter> is pressed, or <Esc> is pressed, the user is returned to where they were before <F9> was pressed without affecting any existing field values. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 43: Upgrading The Bios
2. Write down the current settings in the BIOS Setup program. Note: Do not skip Step 2. You need these settings to configure your server at the end of the procedure. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 44: Upgrading The Bios
1. Power down and unplug the system from the AC power source. 2. Move the recovery jumper at JIF3 from the spare location at pins 2 and 3 to cover pins 1 and 2. Refer to the following figure. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 45: Clearing The Password
“clear” position clears both passwords. Before a new password(s) is set, you must restore the password clear jumper to its original position. 1. Power down the system and disconnect the AC power. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 46: Clearing The Cmos
2. Open the server chassis. For instructions, see your server chassis documentation. 3. Move the jumper from the default operating position (covering pins 1 and 2) to the reset / clear position (covering pins 2 and 3). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 47: Updating The Integrated Bmc
Integrated BMC into an update mode, allowing the firmware to load safely onto the flash device. In the unlikely event the Integrated BMC firmware update process fails (due to the Integrated BMC not being in the proper update state), the server ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 48 9. Move jumper from the enabled position (covering pins 2 and 3) to the disabled position (covering pins 1 and 2). 10. Close the server chassis. 11. Reconnect the AC cord and power up the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 49: Chapter 3: Hardware Installations And Upgrades
Server System SR1630HGP are hot-swappable and are noted as such (where applicable) in the following instructions. ® Note: Most of the illustrations in this chapter show the Intel Server System SR1630GP with an optional optical drive installed. Unless otherwise noted, the instructions for removing and ®...
Page 50: Removing And Installing The Front Bezel
Removing and Installing the Front Bezel ® The front bezel is available as an optional accessory for the Intel Server System SR1630GP / SR1630HGP. Note the orientation in the following figures and make sure you position your bezel as shown.
Page 51: Installing The Front Bezel
2. Push the bezel onto the front of the server system until it clicks into place. 3. Lock the bezel. AF003247 Figure 15. Installing the Front Bezel ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 52: Removing And Installing The Server Cover
6. SR1630GP: Push rearward on the blue grip point at the front of the server. Slide the cover back until it stops and then lift the cover upward to remove it. See letter “C” in Figure 16. AF000662 Figure 16. Removing the Server System Cover (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 53: Figure 17. Removing The Server System Cover (Sr1630Hgp)
8. SR1630HGP: Push rearward on the blue grip point at the front of the server. Slide the cover back until it stops and then lift the cover upward to remove it. See letter “B” in Figure 17. AF001578 Figure 17. Removing the Server System Cover (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 54: Installing The Server System Cover
Slide the cover forward. See letter “A” in Figure 19. 6. SR1630HGP: Install the four screws at the front of the server. See letter “B” in Figure 19. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 55: Removing And Installing The Processor Air Duct
3. Remove the server system cover. For instructions, see “Removing the Server System Cover”. 4. Lift the processor air duct from its location behind the two system blower fans (see Figure 20 for SR1630GP; see Figure 21 for SR1630HGP). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 56: Figure 20. Removing The Processor Air Duct (Sr1630Gp)
AF003248 Figure 20. Removing the Processor Air Duct (SR1630GP) AF003249 Figure 21. Removing the Processor Air Duct (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 57: Installing The Processor Air Duct
5. Install the server system cover. For instructions, see “Installing the Server System Cover”. AF003250 Figure 22. Installing the Processor Air Duct (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 58: Installing And Removing Memory
DIMM B2 starting from the center of the board. See “Memory” on page 14 for a discussion of the memory requirements and options. See “Server System References” on page x for a link to the list of tested DIMMs. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 59: Installing Dimms
“Installing the Server System Cover”. Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this book. See “Safety Information” on page iii. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 60 6. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package. 7. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 61: Replacing The Processor
9. Remove the processor. 10. If installing a replacement processor, see “Installing the Processor” on page Otherwise, install the protective socket cover over the empty processor socket and then reinstall the chassis cover. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 62: Installing The Processor
Figure 25. Lifting the Processor Socket Handle 5. Push the rear tab with your finger to slightly lift the front of the load plate. Raise the load plate completely. Raise the CPU load plate (see Figure 26). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 63: Figure 26. Opening The Load Plate
Caution: Do not touch the socket pins; they are very sensitive and easily damaged. 6. Remove the processor from the packaging box and remove the protective shipping cover. See Figure 27. AF003189 Figure 27. Removing the Shipping Cover ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 64: Figure 28. Installing The Processor
9. Remove the protective socket cover. See Figure Figure 29. Removing the Protective Socket Cover Note: Retain the protective socket cover for use when removing a processor that will not be replaced. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 65: Installing The Heat Sink
Figure 30. Do not fully tighten one screw before tightening another. 5. Gradually and equally tighten each captive screw in the same order until each is firmly tightened. AF001049 Figure 30. Installing the Heat Sink ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 66: Installing And Removing A Hard Drive (Sr1630Gp)
2. Power down the server. Unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see “Removing the Server System Cover” on page 4. Locate the drive position you want to use. See Figure ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 67: Figure 31. Locating Drive Positions (Sr1630Gp)
Figure 32. Save this screw. You will use it to reinstall the drive assembly later. 7. Lift the drive carrier from the chassis. See letter “B” in Figure 32. AF001050 Figure 32. Removing Drive Carrier from the Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 68: Figure 33. Installing Drive Into Drive Carrier (Sr1630Gp)
“C” in Figure 34. Note: You must install the assembly that contains the optical drive bracket at the left side of the system. AF003253 Figure 34. Install Drive Assembly into the Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 69 — Letter “B”: If a drive is installed in the HDD0 carrier, attach the middle connector on the daisy chain power cable to the HDD0 power connector. See letter “D” in Figure ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 70: Removing A Hard Disk Drive (Sr1630Gp)
2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see “Removing the Server System Cover” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 71: Figure 36. Removing Drive Carrier From The Server System (Sr1630Gp)
“Installing a Hard Disk Drive (SR1630GP)” on page 44, beginning with step 8. 10. Insert the screws that held the drive in the carrier into the screw locations on the carrier for future use. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 72 Note: You must install the assembly that contains the optical drive bracket at the left side of the system. 13. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 73: Installing And Removing A Hot-Swap Sata Drive (Sr1630Hgp)
1. If it is installed, remove the front bezel. For instructions, see “Removing the Front Bezel”. 2. Locate the drive position you want to use. See Figure AF003255 Figure 37. Locating Drive Positions (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 74: Figure 38. Removing The Drive Carrier (Sr1630Hgp)
9. Align the holes in the drive to the holes in the drive carrier and attach it to the carrier with the screws that were attached to the plastic retention device. See letter “B” in Figure 39. AF001584 Figure 39. Installing Drive into Drive Carrier (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 75: Removing A Hot-Swap Sata Drive (Sr1630Hgp)
7. With the black lever in the fully open position, slide the drive carrier into the server system. The green latch must be to the right. Do not push on the black lever until the lever begins to close by itself. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 76: Installing Or Removing A Slimline Optical Drive (Sr1630Gp)
“Removing the Front Bezel” on page 5. First time installation only: Remove the knock-out by rocking it back and forth. See letter “A” in Figure 41. You cannot reinstall the knock-out. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 77: Figure 41. Removing The Knock-Out From The Sheet Metal Panel
8. Reinstall the screw that you removed in Step 5. 9. Connect the mini SATA power connector on the optical drive. 10. Connect the data cable to the optical drive and to the SATA connector on the server board. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 78: Removing A Slimline Optical Drive
“C” in Figure 44. Save this screw. You will reinstall it later. 7. Slide the optical drive out through the front of the system. See letter “D” in Figure 44. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 79: Figure 44. Removing The Optical Drive From The Server System
10. Store the brackets for future use. 11. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel” on page 12. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 80: Installing Or Removing A Slimline Optical Drive (Sr1630Hgp)
5. First time installation only: Remove the peripheral knock-out by rocking it back and forth. 6. Attach the optical drive attachment bracket as shown in Figure 46. AF001643 Figure 46. Attaching the Optical Drive to the Attachment Bracket ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 81: Removing A Slimline Optical Drive (Sr1630Hgp)
5. Remove the screws holding the drive in place (see letters “A” and “B” in Figure 48) and slide the optical drive assembly out through the front of the chassis (see letter “C” in Figure 48). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 82: Figure 48. Removing The Optical Drive From The System
Figure 49. Removing the Optical Drive from the Attachment Bracket 7. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel” on page 8. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 83: Installing And Removing The Pcie* Riser Assembly
5. Lift riser assembly up to remove it. Use caution to gently ease the riser card from the add-in card slot so you do not damage the slot or the riser card. See Figure AF003259 Figure 50. Removing PCIe* Riser Assembly from the Server System ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 84: Installing The Pcie* Riser Assembly
3. Press down uniformly until the two hooks on the rear of the PCIe* riser assembly engage the server system back panel slots. The riser cards will seat into the matching sockets on the server board. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 85: Installing Or Replacing A Pcie* Riser Card
7. Remove the two screws that attach the riser card to the riser assembly. See Figure 52. Save these screws to be used later. AF003288 Figure 52. Removing Riser Card from Riser Assembly ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 86: Installing A Pcie* Riser Card
10. Connect any cables to add-in cards that require them. See your add-in card documentation for information and add-in card requirements. 11. Re-install the processor air duct. For instructions, see “Installing the Processor Air Duct” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 87: Installing And Removing A Pci Add-In Card
3. Remove the server system cover. For instructions, see “Removing the Server System Cover” on page 4. Remove the PCIe* Riser assembly. For instructions, see “Removing the PCIe* Riser Assembly” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 88: Removing A Pci Add-In Card
3. Remove the server system cover. For instructions, see “Removing the Server System Cover” on page 4. Remove the PCIe* Riser assembly. For instructions, see “Removing the PCIe* Riser Assembly” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 89: Figure 55. Removing A Full Height Add-In Card
“Installing the Processor Air Duct” on page 11. Install the server system cover. For instructions, see “Installing the Server System Cover”. 12. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 90: Replacing The Server Board
6. Detach all cables connected to the server board. 7. Remove the heat sink and the processor. For instructions, see “Removing the Heat Sink and Processor” on page 8. Remove the DIMMs. For instructions, see “Removing DIMMs” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 91: Figure 56. Removing The Server Board
14. Reconnect all cables to the server board. For a full cabling diagram, see Figure 80 on page 15. Install the processor air duct. For instructions, see “Installing the Processor Air Duct” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 92: Installing The Server Board
6. Place the server board into the server system as shown by letter “A” in Figure 57. 7. Attach the server board with nine screws. See letter “B” in Figure 57. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 93: Figure 57. Installing The Server Board
AF003262 Figure 57. Installing the Server Board ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 94: Replacing The Cmos Battery
Kassera använt batteri enligt fabrikantens instruktion. Varoitus: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 95: Figure 58. Replacing The Cmos Battery
8. Remove the new lithium battery from its package, and, being careful to observe the correct polarity, insert it in the battery socket. 9. Close the chassis. 10. Run the BIOS Setup utility to restore the configuration settings. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 96: Replacing The Power Supply (Sr1630Gp)
— C: Daisy-chain cable to: Optical drive power connector, if an optical drive is installed HDD0 power connector, if a hard drive is installed here HDD1 power connector, if a hard drive is installed here ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 97: Figure 59. Disconnecting Power Cables (Sr1630Gp)
AF003263 Figure 59. Disconnecting Power Cables (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 98: Figure 60. Removing Power Supply From The Server System (Sr1630Gp)
See letter “B” in Figure 60. 7. Slide the power supply forward (see letter “C”) and then lift it from the chassis. AF003264 Figure 60. Removing Power Supply from the Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 99: Figure 61. Installing Power Supply Module Into The Server System (Sr1630Gp)
10. Insert the screw you removed in Step 5 to attach the power supply to the server system. See letter “C” in Figure 61. AF003265 Figure 61. Installing Power Supply Module into the Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 100: Figure 62. Connecting Power Cables (Sr1630Gp)
Figure 62. Connecting Power Cables (SR1630GP) 12. Install the server system cover. For instructions, see “Installing the Server System Cover”. 13. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 101: Replacing The Power Supply (Sr1630Hgp)
(see letter “B” in Figure 63). 6. Slide the power supply forward (see letter “C” in Figure 63) and then lift it from the chassis. AF003267 Figure 63. Removing Power Supply from the Server System (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 102: Figure 64. Installing Power Supply Module Into The Server System (Sr1630Hgp)
10. Install the server system cover. For instructions, see “Installing the Server System Cover”. 11. Plug all peripheral devices and the AC power cable into the server (see letter “C” in Figure 64). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 103: Replacing The Front Panel Board (Sr1630Gp)
“D” in Figure 65. Save these screws. You will re-install them later. 7. Lift the front panel board from the system. See letter “E” in Figure 65. AF003269 Figure 65. Removing Front Panel Board from the Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 104: Figure 66. Installing Front Panel Board Into The Server System (Sr1630Gp)
Figure 66. Installing Front Panel Board into the Server System (SR1630GP) 13. Install the server system cover. For instructions, see “Installing the Server System Cover”. 14. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 105: Replacing The Front Panel Board (Sr1630Hgp)
6. Slide the front panel board back (see letter “B” in Figure 67) and lift the front panel board from the system (see letter “C” in Figure 67). AF003271 Figure 67. Removing Front Panel Board from the Server System (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 106: Figure 68. Removing Light Pipes From The Front Panel Board (Sr1630Hgp)
(see letter “B” in Figure 69). 9. Use the screw you removed in Step 5 to attach the front panel board to the system (see letter “C” in Figure 69). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 107: Figure 69. Installing Front Panel Board Into The Server System (Sr1630Hgp)
AF003273 Figure 69. Installing Front Panel Board into the Server System (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 108: Figure 70. Installing Light Pipes On The Front Panel Board (Sr1630Hgp)
12. Connect the front panel cable. 13. Install the server system cover. For instructions, see “Installing the Server System Cover”. 14. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 109: Replacing A System Fan (Sr1630Gp)
5. Disconnect the two fan cables from the server board (see letter “B” in Figure 71) and untie the cable tie (see letter “C” in Figure 71). AF003275 Figure 71. Disconnecting System Blower Fans (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 110: Figure 72. Removing Bracket And System Blower Fans From Server System (Sr1630Gp)
8. Lift the fan bracket from the server. Lift the bracket at an angle, front of the bracket first, to clear the hard disk drive brackets. See letter “C” in Figure 72. AF003276 Figure 72. Removing Bracket and System Blower Fans from Server System (SR1630GP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 111: Figure 73. Removing Fan From Fan Bracket (Sr1630Gp)
13. Route the cable from the fan at the right around the right side of the assembly and under the clip at the front of the fan bracket. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 112: Figure 74. Connecting System Blower Fans (Sr1630Gp)
14. Connect the fans to the server board. See letters “A” and “B” in Figure 74. AF003277 Figure 74. Connecting System Blower Fans (SR1630GP) 15. Install the processor air duct. For instructions. see “Installing the Processor Air Duct” on page ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 113: Replacing A System Fan (Sr1630Hgp)
5. Remove the two screws that hold the fan in place. Save these screws. You will re- install them later. 6. Disconnect the fan cable from the server board (see letter “B” in Figure 75). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 114: Figure 75. Removing Fan From The Server System (Sr1630Hgp)
9. Connect the fan cable to the server board (see letter “B” in Figure 76). 10. Install the processor air duct (see letter “C” in Figure 76). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 115: Installing And Removing The Rack Handles
3. If it is installed, remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel” on page 4. Attach the rack handle to the server system with two screws as shown in Figure 77. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 116: Figure 77. Installing The Rack Handle
5. Repeat Step 4 on the opposite side of the server. 6. (Optional) Install the front bezel, if desired. For instructions, see “Installing the Front Bezel” on page 7. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 117: Removing The Rack Handles
5. Repeat Step 4 on the opposite side of the system. 6. (Optional) Install the front bezel, if desired. For instructions, see “Installing the Front Bezel” on page 7. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 118 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 119: Appendix A: Technical Reference
For example, the PCI cooling fan cable is labeled with the letter “C” both where it connects to the server board and at the PCI cooling fan itself. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 120: Power Cable Routing (Sr1630Gp)
To make Figure 79 more clear, where the connectors attach to the components, the labels “F1”, “F2”, and “F3” are used. The end at the power supply itself is labeled “F”. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 121: Data Cable Routing (Sr1630Hgp)
Optical Drive Data to Server Board SATA 3 Link to backplane SPGIO Optical Drive to Power Supply Server Board SATA Connector Legend Begin cable connections at the SATA-0 location. AF003282 Figure 80. Data Cable Routing (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 122: Cable Routing (Sr1630Hgp)
Optical Drive Data to Server Board SATA 3 Link to backplane SPGIO Optical Drive to Power Supply Server Board SATA Connector Legend Begin cable connections at the SATA-0 location. AF003282 Figure 81. Cable Routing (SR1630HGP) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 123: 350-W Single Power Supply Input Voltages
Warning: Do not exceed a combined power output of 90 W for the +5 V and +3.3 V outputs. Exceeding a combined 90 W will overload the power subsystem and may cause the power supplies to overheat and malfunction. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 124: System Environmental Specifications
7 Bels in sound power for a typical office ambient temperature (65 to 75 °F). Your selection of peripherals may change the noise level. Electrostatic Tested to 8 Kilovotls (KV) contact discharge, 12 kilovolts (KV) air discharge; discharge (ESD) no component damage. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 125: Appendix B: Troubleshooting
In addition to the server firmware and files, also update any drivers used for components you installed in your system, such as video drivers, network drivers, and SATA drivers. Intel provides a package called the “Platform Confidence Test” that may help with your diagnostics. See “Server System References” on page x for a link to this software.
Page 126: Problems Following Initial System Installation
• Are all integrated components from the tested components lists? Check the tested memory and chassis lists, as well as the supported hardware and operating system list. See “Server System References” on page x for links to the tested component lists. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 127: Hardware Diagnostic Testing
“No Characters Appear on Screen” on page 106. Specific Problems and Corrective Actions This section provides possible solutions for these specific problems: • Power light does not light. • No characters appear on screen. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 128: Power Light Does Not Light
No Characters Appear on Screen Check the following: • Is the keyboard functioning? Test it by turning the “Num Lock” function on and off to make sure the Num Lock light is functioning. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 129: Characters Are Distorted Or Incorrect
• Does this video monitor work correctly if plugged into a different system? System Cooling Fans Do Not Rotate Properly If the system cooling fans are not operating properly, it is an indication of possible system component failure. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 130: Drive Activity Light Does Not Light
Try a different network cable. • Make sure you are using the correct and the current drivers. See “Server System References” on page x for a link to the current drivers. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 131: Problems With Network
The add-in adapter stopped working without apparent cause • Reseat the adapter. • The network driver files may be corrupt or deleted. Delete and then reinstall the drivers. • Run diagnostics. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 132: System Boots When Installing Pci Card
• If you suspect a transient voltage spike, power outage, or brownout might have occurred, reload the software and try running it again. Symptoms of voltage spikes ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 133: Devices Are Not Recognized Under Device Manager (Microsoft Windows* Operating System)
Devices are not Recognized under Device Manager (Microsoft Windows* Operating System) ® The Microsoft Windows* operating systems do not include all of the drivers for the Intel chipsets, onboard NICs, and other components. See “Server System References” on page x for a link to the current drivers and chipset files.
Page 134: Led Information
LED Information ® The Intel Server System SR1630GP / SR1630HGP includes LEDs that can aid in troubleshooting your system. Table 10 lists these LEDs and provides a description of their use. Table 10. LED Information LED Name Function Location LED Color...
Page 135: Appendix C: Installation/Assembly Safety Instructions
5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis ground of the system-any unpainted metal surface-when handling components. 6. Do not operate the system with the chassis covers removed. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 136 Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Dispose of used batteries according to manufacturer's instructions. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 137: Deutsch
Netzgerät ein eigenes Netzkabel. Der Wechselstrom des Systems wird durch den Ein-/Aus-Schalter für Gleichstrom nicht ausgeschaltet. Ziehen Sie jedes Wechselstrom-Netzkabel aus der Steckdose bzw. dem Netzgerät, um den Stromanschluß des Systems zu unterbrechen. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 138 4. Bringen Sie die Verschlußeinrichtung (Padlock) wieder an und schließen Sie diese, um ein unerlaubtes Öffnen des Systems zu verhindern. 5. Schließen Sie alle externen Kabel und den AC Stromanschlußstecker Ihres Systems wieder an. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 139: Français
Le bloc d'alimentation de ce produit ne contient aucune pièce pouvant être réparée par l'utilisateur. Ce produit peut contenir plus d'un bloc d'alimentation. Veuillez contacter un technicien qualifié en cas de problème. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 140 1. Si un cadenas a été installé sur à l'arrière du système, déverrouillez-le et retirez-le. 2. Retirez toutes les vis des panneaux et mettez-les dans un endroit sûr. 3. Retirez les panneaux. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 141 • "Muni d'une prise murale correctement mise à la terre. • "Suffisamment spacieux pour vous permettre d'accéder aux câbles d'alimentation (ceux-ci étant le seul moyen de mettre le système hors tension). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 142: Español
- o a cualquier tipo de superficie de metal sin pintar. 6. No ponga en marcha el sistema si se han extraído las tapas del chasis. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 143 Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 144 "Provisto de una toma de tierra correctamente instalada. • "Provisto de espacio suficiente como para acceder a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 145: Italiano
1. Aprire e rimuovere il lucchetto dal retro del sistema qualora ve ne fosse uno installato. 2. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 146 • "Dotata di una presa a muro correttamente installata. • "Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 147: Appendix D: Safety Information
English Server Safety Information ® ® This document applies to Intel server boards, Intel server chassis and installed peripherals. To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warnings and precautions in this guide before ®...
Page 148: Intended Application Uses
Provided with sufficient space to access the power supply cord(s), because they serve as the product's main power disconnect. Equipment Handling Practices Reduce the risk of personal injury or equipment damage: ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 149: Power And Electrical Warnings
Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate AC cord is required for each compute module power supply. ® Some power supplies in Intel servers use Neutral Pole Fusing. To avoid risk of shock use caution when working with power supplies that use Neutral Pole Fusing.
Page 150: Electrostatic Discharge (Esd)
Do not attempt to recharge a battery. Do not attempt to disassemble, puncture, or otherwise damage a battery. Cooling and Airflow Caution: Carefully route cables as directed to minimize airflow blockage and cooling problems. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 151: Deutsch
Das vorliegende Dokument bezieht sich auf Serverplatinen, Servergehäuse ® ® Intel Intel (Standfuß und Rack) sowie installierte Peripheriegeräte. Es enthält Warnungen und Vorsichtsmaßnahmen zur Vermeidung von Gefahren durch Verletzung, Stromschlag, Feuer und Beschädigungen von Geräten. Lesen Sie diese Dokument daher sorgfältig, bevor Sie Ihr Serverprodukt installieren oder warten.
Page 152: Sicherheitshinweise Und Vorsichtsmaßnahmen
Dieses Produkt wurde in seiner Eigenschaft als IT-Gerät getestet, das in Büros, Schulen, Computerräumen und ähnlichen öffentlichen Räumlichkeiten installiert werden kann. Die Eignung dieses Produkts für andere Einsatzbereiche als IT (z. B. Medizin, Industrie, Alarmsysteme oder Prüfgeräte) kann u. U. weitere Tests erfordern. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 153: Standortauswahl
Verwenden Sie mechanische oder andere geeignete Hilfsmittel zum Transportieren oder Anheben von Geräten. • Entfernen Sie alle Komponenten, die sich leicht abnehmen lassen, um das Gewicht zu reduzieren und die Handhabung zu erleichtern. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 154: Warnungen Zu Netzspannung Und Elektrizität
Typ entspricht. Jedes Netzteil im System muß über ein eigenes Netzkabel angeschlossen werden. Einige Netzteile von Intel Servern verwenden Nullleitersicherungen. Vorsicht ist geboten im Umgang mit Netzteilen, welche Nullleitersicherungen verwenden, um das Risiko eines elektrischen Schlages zu vermeiden Das Netzteil in diesem Produkt enthält keine Teile, die vom Benutzer gewartet werden...
Page 155: Elektrostatische Entladungen (Esd)
Ausbau aus dem Server mit der Bauelementseite nach oben auf eine geerdete, statisch entladene Unterlage.Verwenden Sie dazu, sofern verfügbar, eine leitfahige Schaumstoffunterlage, aber niche die Schutzhülle der Platine. Ziehen Sie die Platine nicht über eine Fläche. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 156: Andere Gefahren
Öffnen Sie keinesfalls das Gehäuse von Laser-Peripheriegeräten oder Laser- Komponenten. • Laser-Peripheriegeräte oder -Komponenten besitzen keine für den Benutzer wartungsbedürftigen Teile. • Schicken Sie das Gerät für Wartungsarbeiten an den Hersteller zurück. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 157: Français
Français Consignes de sécurité sur le serveur ® Ce document s’applique aux cartes serveur Intel , au châssis de serveur (sur pieds et ® Intel sur rack) et aux périphériques installés. Pour réduire les risques de dommages corporels, d’électrocution, d’incendie et de dommages matériels, lisez ce document et respectez tous les avertissements et précautions mentionnés dans ce guide avant d’installer ou de mettre...
Page 158: Domaines D'utilisation Prévus
Dans les régions sujettes aux orages magnétiques, nous vous recommandons de brancher votre système à un suppresseur de surtension et de déconnecter les lignes de télécommunication de votre modem pendant les orages. • Équipé d’une prise murale reliée à la terre. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 159: Pratiques De Manipulation De L'équipement
• Utilisez l’assistance mécanique ou toute autre assistance appropriée lorsque vous déplacez et soulevez le matériel. • Pour réduire le poids en vue de faciliter la manipulation, retirez tout composant amovible. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 160: Alimentation Et Avertissements En Matière D'électricité
Vous devez les débrancher avant d’ouvrir le châssis, d’ajouter ou de supprimer un composant non connectable à chaud. Les alimentations de certains serveurs Intel sont munies de doubles fusibles pôle/neutre: veuillez observer les précautions d'usage afin d'éviter tout risque d'eléctrocution.
Page 161: Décharges Électrostatiques (Esd)
Afin de permettre une ventilation et un refroidissement corrects, ne mettez le système en marche que lorsque les panneaux du châssis sont en place. L’utilisation du système sans les panneaux peut endommager les composants système. Pour installer les panneaux : ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 162: Español
Retournez-les au fabricant en cas de problème. Español Información de seguridad del servidor ® Este documento se aplica a las tarjetas de servidor de Intel , los gabinetes de servidor de ® Intel (montaje en rack y en pedestal) y los dispositivos periféricos. Para reducir el riesgo de daños corporales, descargas eléctricas, fuego y en el equipo, lea este documento y...
Page 163: Aplicaciones Y Usos Previstos
(por ejemplo, soluciones médicas, industriales, residenciales, sistemas de alarma y equipos de pruebas). ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 164: Selección De La Ubicación
CA estén desenchufado antes de abrir le gabinete, agregar o extraer cualquier componente que no es de conexión en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques eléctricos use precauciones al ®...
Page 165: Advertencias El Acceso Al Sistema
A no ser que esté instalando o extrayendo un componente de conexión en funcionamiento, deje que el sistema se enfríe antes de abrir las cubiertas. Para que no llegue a tocar los componentes que estén calientes cuando esté realizando una instalación ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 166: Descarga Electrostática (Esd)
Para instalar las cubiertas: • Compruebe primero que no ha dejado herramientas o piezas sueltas dentro del sistema. • Compruebe que los cables, tarjetas adicionales y otros componentes están instalados correctamente. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 167 • No abra la caja de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 168 服务器安全信息本文档适用于 Intel® 服务器主板、 Intel® 服务器机箱（基座和机架固定件）和已安装的外设。为减少人身伤害、电击、火灾以及设备毁...
Page 169 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 170 应用的其他产品种类和环境（如医疗、工业、住宅、报警系统和测试设备）的适用性尚有待进一步的评估。场地选择本系统专为在典型办公环境运行而设计。请选择符合以下条件的地点：清洁、干燥，无气载微粒（而非一般的室内尘埃）。通风良好，远离热源（包括直接日晒和散热器）。远离振动源或物理震动。与电气设备产生的强大电磁场隔离。在易受闪电袭击的地区，我们建议将系统插入电涌抑制器并在闪电期间断开通信线路与调制解调器之间的连接。提供正确接地的墙壁插座。提供足够的空间，以便拿取电源供应线，因为这是本产品的主要电源断开器。设备操作规范减少人身伤害或设备受损的危险：移举设备时遵守当地的职业健康与安全要求。借助机械手段或其他合适的手段移举设备。拆除一切易分离组件，以降低重量并方便操作。电源与电气警告注意事项电源按钮（如待机电源标记所示）并不能完全关闭系统的交流电源，只要系统已接通电源，就存在 5V 待机电源。要从系统切断电源，须从墙壁电源插座中拔下交流电线。您的系统可能不止使用一根交流电线。请确保所有的交流电线都已拔下。打开机箱或增加或去除任何热插拔组件之前，确保交流电线已拔下。若非所需的确切类型，请勿尝试修改或使用交流电线。系统的每个电源供应设备都需要一根单独的交流电线。本产品的电源供应设备包含非用户维修部件。请勿打开电源供应设备。电源供应设备包含非常危险的电压级、电流级和能量级。请与生产商联系维修事宜。替换热插拔电源供应设备时，请先拔下需替换的电源供应设备上的电源线，再将其从服务器上移除。 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 171 络和调制解调器。电源线警告如果产品未提供交流电线，请购买一根您所在国家批准使用的交流电线。注意事项为避免电击或火灾危险，请按如下所述对产品所用的电源线进行检查：若非所需的符合接地插座的确切类型，请勿尝试修改或使用交流电线电源线须符合以下标准：电源线的电气额定值须大于产品上标注的电流额定值。电源线须拥有适合插座的安全接地插头或触点。电源线为交流电源的主要断开设备。插座须靠近设备并可随时断开。电源线须插入所提供的拥有合适接地的插座。系统使用警告注意事项为避免人身伤害或财产损失，无论何时检查产品内部，以下安全指导都适用：关闭所有与本产品相连的外设。按下电源按钮至关闭状态，关闭系统。从系统或墙壁插座上拔下所有交流电线，断开交流电源。断开与系统相连的所有线缆和通信线路。卸除舱口盖时，保留所有螺钉及其他紧固件。完成产品内部检查之后，请用螺钉或紧固件重新固定舱口盖。请勿打开电源供应设备。电源供应设备内没有可维修部件。请与生产商联系维修事宜. 增加或替换任何非热插拔组件之前，请关闭服务器电源并断开所有电源线。替换热插拔电源供应设备时，请先拔下需替换的电源供应设备上的电源线，然后再从服务器上移除电源供应设备。注意事项如果服务器一直在运行，任何已安装的处理器和吸热设备都可能很热。除非要增加或移除热插拔组件，否则请待系统冷却后再开盖。为避免在热插拔组件安装过程中接触灼热组件，移除或安装热插拔组件时务须小心。注意事项为避免受伤，请勿触摸运转的风机叶片。如果系统的风机上配有防护装置，请勿卸下风机防护装置运行系统。 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 172 机架固定件警告设备的机架须固定在稳固的支座上，以防从中安装服务器或设备时倒塌。须按照机架生产商提供的安装说明进行安装。从下往上将设备安装在机架上，最重的设备安装在机架的最底层。一次只从机架上安装一件设备。您须负责安装整个机架装置的主要电源断开设备。此主要断开设备须随时可用，且须标明为控制整个装置（而不仅限于服务器）的电源。为避免潜在的电击危险，须对机架及其上所安装的每一件设备实行正确的安全接地。静电放电 (ESD) 注意事项 ESD 会损坏磁盘驱动器、主板及其他部件。我们建议您执行 ESD 工作站的所有步骤。如果没有 ESD 工作站，则采取一些静电放电保护措施，操作部件时，戴上与服务器上的机箱接地或任何未喷漆金属表面连接的防静电腕带。操作主板时始终保持小心。它们可能对 ESD 非常敏感。拿持主板时只接触边缘。从保护包装中或从服务器上取出主板后，请将主板组件侧面朝上放置在无静电的接地表面上。请使用导电泡沫垫（若有），不要使用主板包装。请勿将主板在任何表面上滑动。其他危险替换电池注意事项不正确替换电池可能导致爆炸危险。替换电池时，请只使用设备生产商推荐使用的电池。请按当地法规处置电池。请勿对电池充电。请勿拆卸、刺穿或以其他方式损坏电池。 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 173 为避免幅射暴露和 / 或人身伤害：请勿打开任何激光外设或激光设备的外壳激光外设或激光设备为非用户维修设备请与生产商联系维修事宜 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 174 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 175: Appendix E: Regulatory And Compliance Information
(or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. The final configuration of your end system product may require additional EMC compliance testing. For more information, please contact your local Intel representative.
Page 176: Product Emc Compliance - Class A Compliance
This server system has been tested and verified to comply with the following ® electromagnetic compatibility (EMC) regulations when installed in a compatible Intel host system. For information on compatible host system(s) refer to Intel's Server Builder Web site or contact your local Intel representative. ®...
Page 177: Product Ecology Requirements
Product Ecology Requirements Intel has a system in place to restrict the use of banned substances in accordance with world wide product ecology regulatory requirements. Suppliers Declarations of Conformity to the banned substances must be obtained from all suppliers; and a Material Declaration Data Sheet (MDDS) must be produced to illustrate compliance.
Page 178: Component Regulatory Requirements Needed To Support System Level Certifications
— CE DOC (Europe) — CB Certificate & Report (International) Note: CB to include all CB national deviations) Certification marks to be visible on power supply. Power supply to comply with the Intel power supply specification. • Peripheral Devices (e.g. Disk Drives, CD ROMs) —...
Page 179: Certifications / Registrations / Declarations
C-Tick Declaration of Conformity (Australia) • MED Declaration of Conformity (New Zealand) • BSMI Certification (Taiwan) • GOST R Certification / License (Russia) • RRL Certification (Korea) • IRAM Certification (Argentina) • Ecology Declaration (International) ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 180: Product Regulatory Compliance Markings
Product Regulatory Compliance Markings ® This Intel server system product is provided with the following regulatory marks Table 12. .Product Regulatory Compliance Markings Regulatory Compliance Regionhgfhgf Marking IRAM Mark Argentina Ctick Mark Australia / NZ N232 CANADA ICES-003 CLASS A...
Page 181 (1) This device may not cause harmful interference, and (2) This device must accept interference receive, including interference that may cause undesired operation. Country of Country of Made in China Origin Mark Origin Mark ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 182 注意：本設備包括多條電源系統電纜。為避免遭受電擊，在進行維修之前應斷開兩（2）條電源系統電纜。 German: Dieses Geräte hat mehr als ein Stromkabel. Um eine Gefahr des elektrischen Schlages zu verringern trennen sie beide (2) Stromkabeln bevor Instandhaltung. WEEE WEEE Marking Marking ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 183 This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This product / part includes a battery which contains Perchlorate material. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 184 Regulatory Compliance Regionhgfhgf Marking Standard icon for Power button Should be attached on power button ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 185: Electromagnetic Compatibility Notices
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Page 186: Industry Canada (Ices-003)
Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 187: Bsmi (Taiwan)
Following is the RRL certification information for Korea. English translation of the notice above: 1. Type of Equipment (Model Name): On License and Product 2. Certification No.: On RRL certificate. Obtain certificate from local Intel representative 3. Name of Certification Recipient: Intel Corporation 4.
Page 188 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 189: Appendix F: Warranty
"as is" unless specifically provided for otherwise in any software license accompanying the software. If any Product furnished by Intel which is the subject of this Limited Warranty fails during the warranty period for reasons covered by this Limited Warranty, Intel, at its option, will: •...
Page 190: Warranty Limitations And Exclusions
Limitations of Liability Intel's responsibility under this, or any other warranty, implied or expressed, is limited to repair, replacement, or refund, as set forth above. These remedies are the sole and exclusive remedies for any breach of warranty.
Page 191: How To Obtain Warranty Service
Telephone Support If you cannot find the information you need on Intel's World Wide Web site (http:// www.intel.com/), call your local distributor or an Intel Customer Support representative.
Page 192 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 193: Appendix G: Getting Help
Telephone All calls are billed per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel reserves the right to change the pricing for telephone support at any time without notice). ® Before calling, fill out an Intel Server Issue Report Form.
Page 194: Latin America
Easter Island....Contact AT&T USA at 800 800 311. Once connected, dial 800 843 4481 Mainland and Juan .. Contact AT&T USA at 800 225 288. Once connected, dial 800 843 4481 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 195 Paraguay ... 001 916 377 0114 Peru ... 001 916 377 0114 Uruguay..001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 ® Intel Server System SR1630GP / SR1630HGP Service Guide...
Page 196 ® Intel Server System SR1630GP / SR1630HGP Service Guide...

This manual is also suitable for:

Sr1630hgp

Intel SR1630GP - Server System - 0 MB RAM Service Manual

Safety Information

Preface

Chapter 1: Server System Features

Chapter 2: Server Utilities

Chapter 3: Hardware Installations and Upgrades

Appendix A: Technical Reference

Appendix B: Troubleshooting

Appendix C: Installation/Assembly Safety Instructions

Appendix D: Safety Information

Appendix E: Regulatory and Compliance Information

Appendix F: Warranty

Appendix G: Getting Help

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intel SR1630GP - Server System - 0 MB RAM

Summary of Contents for Intel SR1630GP - Server System - 0 MB RAM