Monitoring Mpls Minor Interfaces - Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual

Table 48: show mpls interface Output Fields (continued)
Related Topics

Monitoring MPLS Minor Interfaces

Display status and configuration information about MPLS minor interfaces.
Purpose
The show mpls interface minor command displays the same information.
To display information about MPLS minor interfaces:
Action
host1:pe1#show mpls minor-interface
MPLS minor interface pe1-to-pe2 (transmit)
Field Name Field Description
hcpkts Number of high-capacity (64-bit) packets received or sent
errors Number of packets that are dropped for some reason at receipt or
before being sent
discards Number of packets that are discarded due to lack of buffer space
at receipt or before being sent
adjacency Number of adjacencies currently established
session Number of sessions currently established
accum adjacency Cumulative total number of adjacencies established since interface
is up
accum session Cumulative total number of sessions established since interface is
up
hello recv Number of hello messages received
hello sent Number of hello messages sent
hello rej Number of hello messages rejected
adj setup Number of adjacencies set up
adj deleted Number of adjacencies deleted
show mpls interface
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Chapter 4: Monitoring MPLS
Monitoring MPLS Minor Interfaces
345