Stacking Commands; Dedicated Port Stacking - NETGEAR ProSafe GSM7228PS Cli Manual

7200 series managed switch cli refernce manual for software version 8.0.3

Hide thumbs Also See for ProSafe GSM7228PS:

Table of Contents

The Stacking Commands chapter includes the following sections:

"Dedicated Port Stacking" on page 2-1

"Front Panel Stacking Commands" on page 2-10

Note: The commands in this chapter are in one of two functional groups:

Note: Show commands display switch settings, statistics, and other information.

Note: Configuration commands configure features and options of the switch. For

every configuration command, there is a show command that displays the

configuration setting.

The Primary Management Unit is the unit that controls the stack.

This section describes the commands you use to configure dedicated port stacking.

This command sets the mode to Stack Global Config.

Global Config

Stacking Commands

v1.0, May 2010

Table of Contents