port-channel adminmode
This command enables a port-channel (LAG). This command sets every configured port-channel
with the same administrative mode setting.
Format
port-channel adminmode all
Mode
Global Config
no port-channel adminmode
This command disables a port-channel (LAG). This command clears every configured port-
channel with the same administrative mode setting.
Format
no port-channel adminmode [all]
Mode
Global Config
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical
unit/slot/port for a configured port-channel. The option all
all the
configured port-channels.
Default
enabled
Format
port-channel linktrap {<logical unit/slot/port> | all}
Mode
Global Config
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option all disables link trap notifications
for all the configured port-channels.
Format
no port-channel linktrap {<logical unit/slot/port> | all}
Mode
Global Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
enables link trap notifications for
3-105