NETGEAR ProSafe GSM7228PS Cli Manual page 529

Format
max-total-octets <0-4294967295>
Mode Captive Portal Instance mode
session-timeout (Captive Portal)
Use this command to configure the session timeout for a captive portal configuration.
After this limit has been reached, the user will be disconnected. Timeout is time in
seconds.
0 indicates timeout not enforced.
Default 0
Format
session-timeout <0-86400>
Mode Captive Portal Instance mode
no session-timeout
Use this command to reset the session timeout to the default.
Format
session-timeout <0-86400>
Mode Captive Portal Instance mode
idle-timeout
Use this command to configure the idle timeout for a captive portal configuration.
indicates timeout not enforced.
disconnected
.
Default 0
Format
idle-timeout <0-900>
Mode Captive Portal Instance mode
no idle-timeout
Use this command to reset the idle timeout to the default.
Captive Portal Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
After an idle session has been reached this, the user will be
v1.0, May 2010
0
10-12