Stacking; Technologies - NETGEAR ProSafe GSM7228PS Cli Manual

Table 9-49: PIM-DM Log Messages
Component Message
PIM-DM Error creating PIM-DM pipe
Table 9-50: DVMRP Log Messages
Component Message
DVMRP dvmrp_send_graft: failed getting memory for
graft
DVMRP dvmrp_register_neighbor: failed getting
memory for nbr
DVMRP dvmrp_recv_prune: failed getting memory
for prune
DVMRP dvmrp_new_route: failed getting memory for
route
DVMRP dvmrp_prepare_routes: failed getting
memory for dvmrp_ann_rt

Stacking

Table 9-51: EDB Log Message
Component Message
EDB EDB Callback: Unit Join: <num>.

Technologies

Table 9-52: System General Error Messages
Component Message
OS Invalid USP unit = x, slot = x, port =x
Log Messages
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
Cause
This message is logged when the PIM-DM
Pipe (that receives control messages)
creation fails.
Cause
Failed to allocate memory while sending a
graft
Failed to allocate memory while registering a
neighbor
Failed to allocate memory while receiving a
prune
Failed to get memory for a new route entry
Failed to get memory while announcing a
new route entry
Cause
Unit <num> has joined the stack.
Cause
A port was not able to be translated correctly
during the receive.
9-23