Dos-Control Tcpsynfin; Dos-Control Tcpfinurgpsh - NETGEAR ProSafe GSM7228PS Cli Manual

Format
no dos-control tcpsyn
Mode Global Config

dos-control tcpsynfin

This command enables TCP SYN and FIN Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having TCP flags
SYN and FIN set, the packets will be dropped if the mode is enabled. This command is only
available on FSM72xxRS switches.
Default disabled
Format
dos-control tcpsynfin
Mode Global Config
no dos-control tcpsynfin
This command sets disables TCP SYN & FIN Denial of Service protection. This command is only
available on FSM72xxRS switches.
Format
no dos-control tcpsynfin
Mode Global Config

dos-control tcpfinurgpsh

This command enables TCP FIN and URG and PSH and SEQ=0 checking Denial of Service
protections. If the mode is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress having TCP FIN, URG, and PSH all set and TCP Sequence Number set to 0, the
packets will be dropped if the mode is enabled. This command is only available on FSM72xxRS
switches.
Default disabled
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-187